Accessories

The jet spray branch pipe has water flow control ball valve with three settings that sets the mode from jet to spray and shut off.

The diffuser branch pipe has a rotating part that sets the spray mode. When rotating it to one side the nozzle creates a spray. When rotating to the end, the nozzle creates a water curtain that (because of its tiny droplet size) can protect the person holding the nozzle from heat.

The hand control branch pipe also known as the London diffuser branch pipe is fitted with an adjusting handle. Moving the handle will produce fog, spray, jet, and shut off.

The ball shape head of the branch pipe is fitted with many small nozzles pointing in different directions and the head rotates when water passes through it. This creates a rotating jet at different angles.

This nozzle uses aspirating air sucked into the stream of water-based foam and shoots it into a cone shaped sieve that helps foam up the liquid agent. Its lever is adjusted to alter the flow of the liquid agent and to shut it off.

Attack lines are attack hoses designed to fight fires that have past the nascent stage of fire. Their inside diameter ranges between 38 and 76 mm and deliver low or high volume at a maximum operating pressure of 275 psi. These hoses can come as lay flat hoses or booster/reel hoses.

Supply lines are flexible supply hoses that have a large diameter used for bringing water from a distant source to a fire pump or from one pump to another. These hoses come in 3”, 4”, 5” and 6” diameters and operate at pressures up to 300 psi for larger diameters and up to 200 psi for smaller diameters.

A reel hose is a type of hose that is fixed to a spinning reel and gets pre connected to a pump. It is used to put out smaller fires and designed to operate at pressures up to 800 psi. The reel hose is round shaped and flexible and has a thick rubber wall with a thin diameter of 19 and 25 mm. It is designed to maintain its round shape when it is not under pressure for simplicity of rolling.

Forestry hoses are versatile hoses specifically designed to be light weight and tough for ease of manoeuvring in treacherous terrains. They are mainly used for fighting forest fires. Their inside diameter is 25 and 38 mm and is designed with an operating pressures up to 450 psi.

Weight

22kg

Dimensions

580mm diameter, 750mm height

Hose

30m pvc red

Weight without hose

Weight without hose

Wall Projection

260mm

Valve

Chromium plated double 25mm bsp thread

Length of Jet

10m at 300kpa

Rate of discharge

30litres pm at 300kpa

Hose Dimensions

30mx20mm

Wall Projection

260mm